Epiroc SB Series User Manual

Safety and operating instructions
12 © Construction Tools PC AB | 9800 1273 01 | 2020-04-03
Original Instructions
3.3 Labels
The machine is fitted with labels containing important in-
formation about personal safety and machine mainte-
nance. The labels must be in such condition that they
are easy to read. New labels can be ordered from the
spare parts list.
3.3.1 Data plate
A
B
C
D
E
F
A. Machine type
B. Maximum hydraulic pressure
C. Serial number
D. The warning symbol together with the book symbol
means that the user must read the safety and oper-
ating instructions before the machine is used for the
first time.
E. The CE symbol means that the machine is EC-ap-
proved. See the EC Declaration of Conformity which
is delivered with the machine for more information.
F. The EAC symbol means that the machine is EAC
approved.
3.3.2 Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level corre-
sponding to EC-directive 2000/14/EC. See "Technical
data" for accurate noise level.
3.3.3 Labels on the accumulator
Read through the overhaul instructions carefully before
servicing or charging.
2
N
The accumulator must only be charged with Nitrogen.
NOTICE Only certified personnel are allowed to work
with the accumulator.
3.4 Guarantee
The guarantee or product liability will be invalidated by
the following:
• Use other than intended
• Maintenance work not being carried out or being
carried out incorrectly
• The use of the wrong consumables
• The use of non-approved parts
• Damage due to wear
• Special applications without the required safety facil-
ities
• Damage due to improper storage
• Changes not carried out by or in consultation with
the manufacturer

Epiroc SB Series Specifications

General

Brand	Epiroc
Weight	Varies by model
Impact Rate	Varies by model
Impact Energy	Varies by model
Hose Diameter	Varies by model
Sound Pressure Level	Varies by model
Vibration Level	Varies by model
Series	SB Series