E+E Elektronik EE771 Series - Indication of the Analogue and Pulse Output; Indication of the Switch Output; Indication of the MIN; MAX Values

17
Depending on the configuration of the outputs either the measured values, the status of the relay or the consumption
is indicated.
T : 27.97 °C
V
0
: 1.3 m
3
/h
> Clear Consumption
Clear Min/Max
Set Diameter
Exit
V
0
: 1.5 m
3
/h
Rel : 1
V
0
: 45.0 m
3
/h
Rel : 1
V
0
: 323.8 m
3
/h
Maximal
measurand
measuring value
unit
Measurand SI Unit US Unit
v
0 Standardized Flow m/s SFPM
T Temperature °C °F
V
0 Standardized Volumetric
Flow
m
3
/h; m
3
/min; l/min SCFM; SLPM
m Massflow kg/h; kg/min; kg/s kg/h; kg/min; kg/s
Q Consumption m
3
ft
3
p Pressure bar psi
5.3.1. Indication of the analogue and pulse output
Line 1 indicates always the configured measurand at output 1. In line 2 the desired measurement value can be
indicated using the UP and DOWN keys.
5.3.2. Indication of the switch output
Line 1 indicates the status of the switch output. In line 2 the desired measurement value can be indicated using the
UP and DOWN keys.
The display shows an inverse image if the relay output is active (relay has switched).
T : 27.97 °C
V
0
: 1.3 m
3
/h
> Clear Consumption
Clear Min/Max
Set Diameter
Exit
V
0
: 1.5 m
3
/h
Rel : 1
V
0
: 45.0 m
3
/h
Rel : 1
V
0
: 323.8 m
3
/h
Maximal
T : 27.97 °C
V
0
: 1.3 m
3
/h
> Clear Consumption
Clear Min/Max
Set Diameter
Exit
V
0
: 1.5 m
3
/h
Rel : 1
V
0
: 45.0 m
3
/h
Rel : 1
V
0
: 323.8 m
3
/h
Maximal
Switch output inactive (relay has not switched) Switch output active (relay has switched)
5.3.3. Indication of the MIN / MAX values
Keep the DOWN key pressed for > 3 sec to indicate the MIN value.
Keep the UP key pressed for > 3 sec to indicate the MAX value.
T : 27.97 °C
V
0
: 1.3 m
3
/h
> Clear Consumption
Clear Min/Max
Set Diameter
Exit
V
0
: 1.5 m
3
/h
Rel : 1
V
0
: 45.0 m
3
/h
Rel : 1
V
0
: 323.8 m
3
/h
Maximal
MIN value press pushbutton DOWN >3s
MAX value press pushbutton UP >3s