Epomaker EP64 - Light Effects; Change RGB Effects; Toggle RGB Colors; Backlight Speed Adjustment

EN
EN
WINDOWS SHORTCUT
FN + ESC
FN + 1！
F1
FN + 2@
F2
FN + 3#
F3
FN + 4$
F4
FN + 5%
F5
FN + 6^
F6
FN + 7&
F7
FN + 8*
F8
FN + T
Prtsc
FN + Y
Scrlk
FN + U
Pause
FN + G
Insert
FN + H
Home
FN + J
PgUp
FN + B
Delete
FN + N
End
FN + M
PgDn
FN + WIN
Lock WIN Key
FN + L_CTRL
Secondary
Key Mode
FN + SPACEBAR
Battery Check
FN + Z/X/C
Toggle to Layer 1/2/3
FN + 9(
F9
FN + 0)
F10
FN + -_
F11
FN + SHIFT+ESC
~
FN + V
Check Layer
(HOLD 3S)
FN+BACKSPACE
(HOLD 3S)
Reset the Keyboard
FN + Q
Short Press to Switch to BT1;
Long Press to Pair Devices
FN + W
Short Press to Switch to BT2;
Long Press to Pair Devices
FN + E
Short Press to Switch to BT3
Long Press to Pair Devices
FN + R
Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
FN + A
Wired Mode
FUNCTION KEY COMBINATIONS
PAIRING BLUETOOTH
Toggle the switch in the back to ON to make sure that the keyboard
is under the Wireless mode
1. Hold Fn+Q/W/E for 3-5 seconds till the indicators flashes fast in red/green/blue,
the keyboard is ready to pair.
2. Turn on your Bluetooth device and find ‘EP64 BT3.0’ or ‘EP64 BT5.0’, then
connect. When the keyboard is connected to the Bluetooth device, the light on the
Q/W/E key stops flashing and the connection is done.
3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.
Toggle the switch in the back to ON to make sure that the keyboard
is under the Wireless mode
PAIRING WIRELESS 2.4GHZ
1. Short press the FN+R key combination, the backlight will flash blue 3 times, the
keyboard will enter 2.4G mode
2. Long press FN+R key combination for 3-5 seconds to enter pairing mode, R
indicator will flash white, plug in the receiver, after successful pairing, R indicator will
be on for 2 seconds and then go out, successful connection
CHANGE RGB EFFECTS
Press Fn + I/O/P to switch the RGB effects of your Epomaker EP64 keyboard.
MAC SHORTCUT
FN + =+
F12
FN + ESC
FN + 1！
Screen Brightness -
FN + 2@
Screen Brightness +
FN + 3#
Task
FN + 4$
Control Pad
FN + 5%
FN + 6^
FN + 7&
Previous Track
FN + 8*
Play/Pause
LIGHT EFFECTS
FN + O
RGB Effects 7-12
FN + P
RGB Effects 13-18
FN + ,<
Backlights Brightness +
FN + .>
Backlights Brightness -
Change Dynamic
RGB Direction
FN + I
Efectos RGB 1-6
Toggle RGB Colors
FN + ;:
FN + ‘”
FN + [{
Backlights Speed -
FN + ]}
Backlights Speed +
FN + 9(
Next Track
FN + 0)
Mute
FN + -_
Volume -
FN + SHIFT+ESC
~
FN + =+
Volume +