EasyManua.ls Logo

ePro Select EV2911RT - Troubleshooting

ePro Select EV2911RT
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Battery Type:
Lithium-Ion battery
Voltage/Capacity: 29.6V / 2200mAh
Dust Bin Capacity: Approx. 0.9L
Operating Time: Approx. 15-50 minutes
Suction Power: 30,000 Pa
Sound level: approx. 80dBA
Charging Time: 2.0 hours
Power: 450W
Input: 100-240V~, 50/60Hz
Motor Rated Voltage: DC 29.6V
ECO Speed Mode: Operating time is
50 minutes when fully charged
NORMAL Speed Mode: Operating time
is 25 minutes when fully charged
TURBO Speed Mode: Operating time is
15 minutes when fully charged
TECHNICAL SPECIFICATIONS
OBSERVATION POSSIBLE CAUSE SOLUTION
No power or
vacuum does
not charge
• Power adapter not plugged into
wall outlet securely
•Electric wall outlet
does not have power
•Unit not placed into stand correctly
• Make sure the unit’s power cable is securely
plugged into the wall outlet
• Plug the unit into a different outlet
•Make sure charging recepticles on unit touch
charging recepticles on charging stand
Hand Vacuum
has diminished
suction
• Check if the dust bin is full
The air inow may be blocked
•Recharge Unit
•Turn unit off and unplug the appliance from
the wall outlet and empty the dust bin
• Unplug and remove the nozzle. Check the
extension pipe, remove any blockage
• Make sure unit is fully charged
Dust is coming out
of the vacuum
cleaner
• Check if the dust bin is full
• Check that the dust bin
is properly tted to the
main body
• Check if the dust bin
lter is in the dust bin
• Empty and clean dust bin
• Ret the dust bin to the main body
• Install the lter in the dust bin
Battery no
longer charges
The removable rechargeable
battery has a long use life but will
eventually lose it ability to recharge
• Contact service@eProSelect.com to
purchase a replacement battery pack
TROUBLESHOOTING
Hand Held Vacuum (WDH):
15.4“ x 4.6” x 10.5”
(392 x 118 x 267mm)
PRODUCT DIMENSIONS
Assembled Stick Vacuum
Pole NOT Extended (WDH):
10“ x 10.5” x 42.5”
(255 x 267 x 1079mm)
Assembled Stick Vacuum
Pole Extended (WDH):
10.0“ x 10.5” x 51”
(255 x 267 x 1294mm)