2
Mount near
AC Outlet
STORAGE INSTRUCTIONS
The ePro Select Cordless Vacuum System comes with 6 Bonus
Accessory Tools and a convenient wall-mount storage solution.
Find a wall space location close to an electrical outlet
without any obstructions such as windows or shelving.
With the vacuum connected to the Motorized Brush Roller
and Extension Rod in the collapsed position the assembled
vacuum against the wall where it will be stored and mark
the holes of the wall mount bracket at the right height to
store the vacuum in the upright position.
Use a Phillips screwdriver (not included) to install the wall
mount bracket with the screws provided. Make sure to mark
mounting holes using the wall mounting holes on bracket.
Use the vertical storage pipes to the left, right and
bottom of wall mount bracket to snap in 5 accessory tools.
Set the assembled stick vacuum in the middle of the
wall-mounted storage bracket and plug in charging adapter
into the side with the battery charging port installed into a
nearby power outlet.
u
v
w
x
y
NOTE: The detachable battery can also be charged on a
at surface near an outlet when removed from the vacuum.
Individual Battery Pack Wall Mount
Storage Solution Wall Mount
Adjustable
Telescopic
Extension Pole
Collapses to
16.7” (425mm) for
stable self-storage
Collapsible Storage
Collapsible
Extension Rod
Press the extension pole button to collapse the
extension rod to its shortest position for better
stability if storing below the Wall Mount Bracket.
The main battery holder can be used for the battery
pack detached from the motor housing or a spare
battery pack. An additional battery pack and
separate wall-mountable holder are included.
To Next Page
Loading...