2
Note:
You must install the update files in the same directory as the original version of Photo Print in order for the update to work
correctly. If your installation of EPSON Smart Panel was performed using the default directory you need to install the files to the
following location on your Hard Drive
C:\Program Files\Epson\EPSON Smart Panel for Scanners\Photo Print Utility
. If you did
not install the program using the default location you will need to install the Update files to the directory in which you installed
EPSON Smart Panel's Photo Print Utility.
7. Browse to the following location: "C:\program files\epson\epson smart panel for scanners\photo print utility” and click OK
8. If you are pointing to the correct folder, you will see the following screen. Click Next. If you do not see the screen below, go
back to step 6.
To Next Page
Loading...
