Epson 600 - Saving and Re-Using Scanning Settings

Advanced Scanning
Page 49
Saving and Re-using Scanning
Settings
You can save your scan settings in a special settings
file with a .TWN extension. You can either overwrite
the existing settings file, or you can save your settings
as a new file and keep the existing settings file. When
you want to use a particular group of settings again,
you can load the appropriate file.
To save a new settings file that overwrites the old
settings file, do the following: From the Settings menu,
click Save Settings. The new file overwrites the old
settings file.
To save a settings file under a new name and keep the
old settings file, do the following:
1. From the Settings menu, click Save Settings As.
The Save As dialog box appears.
2. Enter a new file name and path.
Note:
This procedure does not
save custom tone curve
settin
g
s. Refer to
Re-use Tone Curve
Settin
g
s for the
procedures on savin
g
tone curve settin
g
s.
TWAIN.bk : Advanced.fm5 Page 49 Monday, September 8, 1997 11:30 AM