Advanced Scanning
Page 27
Deleting a Frame from a Batch
To delete a frame, click on the frame to select it, then
press the Delete key.
Stopping a Batch Scan
To stop a batch scan in progress, click Cancel.
Scanning Negatives
If you have installed an optional transparency unit on
your scanner, perform the following steps to scan a
negative and turn it into a positive image:
1. Return all settings to their defaults by clicking the
Reset button, then click the Prescan button.
2. Frame the negative to be scanned, then click the
Negative button. The image will display as a
positive image.
3. Click the Scan button to scan the positive image.
Ne
ative
Button
TWAIN.bk : advanced.fm5 Page 27 Monday, September 8, 1997 2:06 PM
To Next Page
Loading...
