Epson 740 - Page 21

19
Solomon
short.bk Rev. C
A5 size KAUD.FM
10/30/98 Pass 3
R
Proof Sign-off:
Y.Yano _______
N.Nomoto _______
K.Norum _______
Installing in Windows 95, 98, and NT 4.0
1. Insert the printer software CD shipped with your printer in
the CD-ROM drive. The Installer dialog box appears. (For
floppy disk users, insert the disk in a disk drive, then double-
click the FD drive icon and double-click the
Setup.exe
icon.)
2. Click
Install
to start the printer software installation.
3. When the installation is complete, click
OK
.
Note:
❏ If the New Hardware Found screen or any other Wizard appears
when you turn on your computer, click
Cancel
and follow the steps
above.
❏ Installation time varies depending on your computer.
For information on opening and using the software, see “Printing
Your First Page for Windows” on page 28. See also “Using the
Printer Software for Windows” in the online Reference Guide.
If you use your printer on a network with Windows 95, 98, or NT
4.0, see “Network Printing” in the online Reference Guide.
Installing in Windows 98 with USB interface
If you connected your printer using the USB interface, you need
to install the EPSON USB Printer Device Driver and the printer
software included in the printer software CD-ROM. Follow the
instructions in the USB User’s Guide that came with your printer.
Note:
If you wish to make a floppy disk version of the printer software included
on your CD-ROM, insert the printer software CD-ROM, then click the
Driver disk creation utility
button and follow the on-screen
instructions.