47
Installing Macintosh Software
1. Make sure your printer and Macintosh are turned off.
2. Turn on your Macintosh and wait until you see the desktop icons, then turn on
your printer.
3. Insert the EPSON printer software diskette 1.
4. If necessary, double-click the
Disk1
icon to open the diskette window. Then
double-click the Installer icon.
5. Click Continue.
6. Click Install and follow the on-screen instructions to install your printer driver.
Then click Restart.
7. After you finish installing printer software, open the Chooser. If you’re connected
to the Macintosh printer port or to a PowerBook with one port, turn off
AppleTalk.
8. Click the SC 900 icon, then click the icon for the port you’re using. Turn on
background printing, if you want to use it. Then close the Chooser.
9. Now you’re ready to print! See “Printing with a Macintosh” on page 17 for
instructions.
basics.book Page 47 Friday, January 8, 1999 11:57 AM
To Next Page
Loading...
