Epson AcuLaser CX11 - When Transparencies Are Jammed at the MP Tray

Troubleshooting 24
EPSON AcuLaser CX11 Series Basic Operation Guide
5. Gently pull out any sheets of paper with
both hands. Be careful not to tear the
jammed paper.
6. Close cover G.
When transparencies are jammed at the
MP tray
When transparencies are jammed, follow the
steps below to clear the jam.
1. Open the MP tray cover and remove all
transparencies that are loaded.
2. Open cover E. Then, gently pull out any
transparencies with both hands. Be
careful not to tear the jammed
transparency.