Safety Instructions
Important Safety Instructions
The illustrations used in this section show the Epson AcuLaser CX17NF/CX17WF Series.
Setting up the printer
❏ Because the printer weighs approximately 14 kg (30.9 lb) for Epson AcuLaser CX17, 15 kg (33.1 lb)
for Epson AcuLaser CX17NF/WF with consumable products installed, one person should not lift
or carry it. Two people should carry the printer, lifting it by the correct positions as shown below.
❏ When moving the printer, always keep it horizontal.
❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏ Be sure the AC power cord meets the relevant local safety standards. Use only the power cord that
comes with this printer. Use of the another cord may result in fire or electric shock. This printer’s
power cord is for use with this printer only. Use with other equipment may result in fire or electric
shock.
❏ If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses
in the plug, make sure you replace them with fuses of the correct size and rating.
❏ Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
R41AD1770MFP Safety Information Guide
Safety Instructions 1
To Next Page
Loading...
Need help?
General