Epson AcuLaser CX17 Series - Page 8

❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
Standard and approvals
European model
Epson AcuLaser
CX17 CX17NF CX17WF
Low voltage directive 2006/95/EC EN60950-1
✓✓✓
EMC directive 2004/108/EC EN55022 Class B
✓✓✓
EN61000-3-2
✓✓✓
EN61000-3-3
✓✓✓
EN55024 ✓✓✓
R&TTE directive 1999/5/EC EN300 328 – –
✓
EN301 489-1 – – ✓
EN301 489-17 – – ✓
ETSI ES203 021 – ✓✓
EN60950-1 – ✓✓
For European users (Epson AcuLaser CX17NF only)
We, Seiko Epson Corporation, hereby declare that the equipment model L662B is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
R41AD1770MFP Safety Information Guide
Safety Instructions 7