Epson AcuLaser CX37DN Series - Page 59

POP
BEFORE
SMTP
DISABLE/ENABLE Settings
DISABLE / ENABLE
Select whether or not to enable POP Before SMTP.
If ENABLE is selected, specify the time (between 0 and 60
seconds). The default setting is 1sec.
POP3 SERVER ADDR.
*3
Specify the host name or IP address for the POP3 server
used for authentication with POP Before SMTP.
The default setting is 0.0.0.0.
POP3 PORT NO.
*3
Settings
1-65535 (Default: 110)
Specify the port number used for communicating with
the POP3 server.
POP3 TIMEOUT
*3
Settings
30-300 sec (Default: 30 sec)
Select the amount of time (in seconds) until the con‐
nection with the POP3 server times out.
POP3 ACCOUNT
*3
Specify the user name (up to 63 characters) used for
authentication with POP3 server.
POP3 PASSWORD
*3
Specify the password (up to 15 characters) used for au‐
thentication with POP3 server.
SMTP
AUTH.
DISABLE/ENABLE Settings
DISABLE / ENABLE
Select whether or not to enable SMTP authentication.
SMTP USER NAME
*4
Specify the user name (up to 63 characters) used for
SMTP authentication.
SMTP PASSWORD
*4
Specify the password (up to 15 characters) used for
SMTP authentication.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 59