Epson AcuLaser CX37DN Series - Page 60

LDAP
SETTING
DISABLE/ENABLE Settings
DISABLE / ENABLE
Select whether or not to enable the LDAP function.
LDAP SERVER ADDR.
*5
Specify the address (up to 64 characters) of the LDAP
server.
The default setting is 0.0.0.0.
LDAP PORT NO.
*5
Settings
1-65535 (Default: 389)
Specify the port number of the LDAP server.
Note:
The default setting is 636 when SSL SETTING is set to
ENABLE.
SSL SETTING
*5
Settings
DISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASE
*5
Specify the search starting point (up to 64 characters) in
a hierarchical structure arranged on the LDAP server.
ATTRIBUTE
*5
The conditions for searches can be specified as a name
or e-mail address (up to 32 characters).
The default setting is cn.
SEARCH METHOD
*5
Settings
BEGIN / CONTAIN / END
The specified characters can be searched for at the be‐
ginning, within or at the end.
LDAP TIMEOUT
*5
Settings
5-300 sec (Default: 60 sec)
Specify the maximum wait time during a search.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Control Panel and Configuration Menu 60