❏ Do not turn off the printer:
- After turning on the printer, wait until the Ready/Data light is on.
- While the Ready/Data light is flashing.
- While printing.
❏ Avoid touching the components inside the printer unless instructed to do so in this guide.
❏ Do not expose the drum to room light for more than five minutes. Exposure to light can damage
the drum, causing dark or light areas to appear on the printed page and reducing the service life of
the drum.
❏ Be careful not to scratch the surface of the drum. Avoid touching the drum, since oil from your
skin can permanently damage its surface and affect print quality.
❏ Follow all warnings and instructions marked on the printer.
❏ Except as specifically explained in the printer’s documentation, do not attempt to service this
printer yourself.
❏ Periodically disconnect the plug from the electrical outlet and clean the blades.
❏ Do not disconnect the plug while the printer is on.
❏ If the printer will not be used for a long time, disconnect the plug from the electrical outlet.
❏ Unplug this printer from the wall outlet before cleaning.
❏ Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
Handling consumable products
❏ Do not burn used consumable products because they might explode and injure someone. Dispose
of them according to local regulations.
❏ Be sure to keep consumable products out of the reach of children.
❏ When handling a toner cartridge, always place it on a clean, smooth surface.
❏ Do not attempt to modify a toner cartridge or take it apart.
❏ Do not touch the toner. Always keep toner away from your eyes. If toner gets on your skin or
clothes, wash it off with soap and water immediately.
❏ If toner is spilled, use a broom and dustpan or a damp cloth with soap and water to clean it up.
Because the fine particles can cause a fire or explosion if they come into contact with a spark, do not
use a vacuum cleaner.
Epson AcuLaser M1400 Series Safety Information Guide
Safety Instructions 5
To Next Page
Loading...
Need help?
General