Epson Artisan 710 Series Network Installation Guide

Wireless Network Installation 5
Wireless Network Installation
To connect to your printer wirelessly, you need to know the name (SSID) of your
wireless network. If it has security enabled, you also need to know the WEP key or
WPA passphrase. Write down your network and security information in the space
provided below:
■ Network name (SSID): _________________________________________
■ WEP key or WPA passphrase: ____________________________________
Note:
Your printer is compatible with 802.11b and 802.11g. If your router or access point
supports 802.11n (Wireless N), makes sure it is set to compatibility mode to allow
802.11b and 802.11g devices to connect to it.
Your printer supports the following wireless security modes: WEP, WPA, and WPA2.
If you don’t know your wireless network name (SSID), WEP key, or WPA passphrase,
contact the person who set up your wireless network before you begin.
If your WPA passphrase contains upper- or lowercase letters, be sure to note it
correctly.
Connect Wirelessly Using the Setup Wizard
Follow the steps below to connect to your printer wirelessly.
1. Select
F Setup on the printer’s control panel, then press OK.
2. Press l or r to select
Network Settings, then press OK.

Epson Artisan 710 Series Specifications

General

Print Technology	Inkjet
Media Card Slots	Yes
Automatic Document Feeder	No
Duplex Printing	Yes
Max Black Print Speed (ppm)	38 ppm
Max Color Print Speed (ppm)	38 ppm
Number of Ink Cartridges	6
Memory Card Support	Yes
Display	2.5-inch LCD
Printer Type	All-in-One
Copy Speed (Color)	38 cpm
Fax Speed	33.6 Kbps
Ink Cartridges	6 individual ink cartridges
Weight	21.2 lbs
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi
Functions	Print, Scan, Copy
Ink Type	Dye-based
Paper Sizes	Letter, Legal, A4
Scan Type	Color
Paper Handling	100-sheet input tray, 20-sheet photo tray