Epson Artisan 710 Series Network Installation Guide

8 Wireless Network Installation
9. When you see a screen like this one, verify that the settings are correct. If you
need to change a setting, press
y Back until you see the setting you need to
change.
10. Once you have verified that your network settings are correct, press
OK to save
the settings and return to the Network Settings menu.
11. Press the
Home button to exit the Network Settings Menu.
12. Wait for the printer to connect to your wireless network (this can take up to
90 seconds).
Once it’s connected, you see the WiFi icon and a signal strength indicator
on the printer’s control panel.
13. Continue with “Install Software” on page 24.
Note:
If the printer doesn’t connect to your wireless network after 90 seconds, the WEP key
or WPA passphrase may have been entered incorrectly. See “Connect Wirelessly Using
the Setup Wizard” on page 5 to select your network settings again.
If the printer still doesn’t connect to your wireless network, see “The printer cannot find
or connect to the wireless router or access point” on page 31.

Epson Artisan 710 Series Specifications

General

Print Technology	Inkjet
Media Card Slots	Yes
Automatic Document Feeder	No
Duplex Printing	Yes
Max Black Print Speed (ppm)	38 ppm
Max Color Print Speed (ppm)	38 ppm
Number of Ink Cartridges	6
Memory Card Support	Yes
Display	2.5-inch LCD
Printer Type	All-in-One
Copy Speed (Color)	38 cpm
Fax Speed	33.6 Kbps
Ink Cartridges	6 individual ink cartridges
Weight	21.2 lbs
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi
Functions	Print, Scan, Copy
Ink Type	Dye-based
Paper Sizes	Letter, Legal, A4
Scan Type	Color
Paper Handling	100-sheet input tray, 20-sheet photo tray