Epson Artisan 810 Series User Manual

Inserting a USB Drive 25
Inserting a USB Drive
You can print from an external storage device connected to the Artisan 810 Series,
such as a USB flash drive, external hard drive, or CD burner.
Note:
Epson cannot guarantee the compatibility of your drive. You may not be able to print
photos from the storage device if they were saved to the device using a product other
than the Artisan 810 Series.
1. Remove any inserted memory card from the Artisan 810 Series.
2. Insert your USB flash drive or the USB cable for your external drive into the
USB port on the front of your Artisan 810 Series.
3. Insert storage media (such as a CD) into your drive, if necessary.
4. If there are folders on your storage media, select the folder you want and press
OK .
5. See the next section to select and print your photos.
Note:
Before removing your USB drive, make sure its access light is not flashing. Also see
step 2 in “Removing Your Card” on page 24.
You cannot use the USB port to transfer images from your external storage device
to your computer. If you want to transfer images, use the memory card slots instead
(see the online Epson Information Center for instructions).

Epson Artisan 810 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 optimized dpi
Scanner Type	Flatbed
Functions	Print, Scan, Copy, Fax
Number of Ink Cartridges	6
Print Speed Color	38 ppm
Fax Speed	33.6 Kbps
Copy Speed Color	38 cpm
Connectivity	USB 2.0, Ethernet, Wi-Fi
Display	3.5" LCD
Ink Type	Dye-based
Print Speed Black	38 ppm
Paper Sizes	A4, A5
Memory Card Support	SD, SDHC
Copy Speed Black	Up to 38 cpm
Supported Media Types	Plain paper, photo paper, envelopes