Maintaining Your All-in-One
43
Maintaining Your All-in-One
Follow the steps here to check and clean the print head, and replace ink cartridges.
To align the print head, if necessary, see the online Epson Information Center.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, the print head nozzles may be
clogged. Follow these steps to check the print head nozzles:
1. Load letter- or A4-size plain paper in the main
paper tray.
2. Press the
Home
button, if necessary, and select
Setup
.
3. Select
Maintenance
, then select
Nozzle Check
.
4. Press x
Start
.
5. Check the nozzle check pattern that prints to see if there are gaps in the lines:
6. If there are no gaps, the print head is clean. Select
Finish Nozzle Check
.
If there are gaps or the pattern is faint, select
Head Cleaning
. Then press
x
Start
to clean the print head.
Nozzles
are clean
Nozzles need
cleaning
To Next Page
Loading...
