3 Remote control
4 2 AA alkaline batteries (for remote control)
5 2 interactive pens
6 4 AAA alkaline batteries (2 batteries for each interactive pen)
7 Interactive module
8 Pen tray
9 USB cable
10 Power cord
11 VGA computer cable
12 Battery charger with 4 AAA rechargeable batteries (for interactive pens)
13 M4 × 10 mm hexagon socket head cap bolt with washer and spring washer
14 M3 × 8 mm cross-head screw
15 M4 hexagonal wrench
16 Projector software CD (for network usage)
17 Projector software for Easy Interactive Function CD-ROM
18 TeamBoard Draw CD
19 Password Protected sticker
Parent topic: Projector Features
Additional Components
Depending on how you plan to use the projector, you may need to obtain the following additional
components:
• To receive an S-Video signal, you need an S-Video cable compatible with your device. See your local
computer or electronics dealer for purchase information.
• To receive a component video signal, you need a D-sub, 15-pin, component-to-VGA video cable. You
can purchase one from Epson or an authorized EPSON reseller.
• To receive an HDMI signal, you need a compatible HDMI cable. See your local computer or
electronics dealer for purchase information.
15
To Next Page
Loading...
