Connecting a Microphone
You can connect a microphone to the projector's Mic port to provide audio support during presentations.
Note: The projector supports dynamic microphones only. (Condensor microphones are not supported.)
If you want to output audio from the microphone when the projector is turned off, you need to adjust the
Standby Mode and Standby Microphone settings in the Extended menu.
1. Connect the microphone cable to the projector's Mic port.
2. Turn on the microphone, if necessary.
Parent topic: Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB Device or Camera to the Projector
Selecting the Connected USB Source
Disconnecting a USB Device or Camera From the Projector
Parent topic: Projector Connections
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector:
• USB flash drive
37
To Next Page
Loading...
