BrightLink Interaction
The BrightLink interactive pens turn any wall or table into
an interactive area, either with or without a computer.
• With a computer, you can use Easy
Interactive Tools (dual pens). This
software lets you use the pen as a mouse
to annotate, save, and interact with
content from your computer.
• Without a computer, you can use the
toolbar that is built into the projector
(single pen). This lets you annotate
images from a document camera,
tablet, DVD player, or other source
connected to your projector.
Students and colleagues can connect
their own laptops and annotate on the
fly using the built-in toolbar, without
installing software.
Get a DVD containing BrightLink
training videos!
Just click the BrightLink Training
Resources link on your desktop or go
to www.epson.com/eduresources
and request a DVD.
Start Here
Follow the steps on this card to get started with your
BrightLink:
1
Connect your computer and turn on the projector
2
Make sure the software is installed
3
Calibrate
• Using the remote control
4
Use the pens
• Choosing the right tool
5
Use the built-in toolbar
To Next Page
