H
Save the issued CA-signed Certificate to a computer connected to the printer.
Obtaining a CA-signed Certificate is complete when you save a certificate to a destination.
Related Information
& “Accessing Web Config” on page 20
& “CSR Setting Items” on page 36
& “Importing a CA-signed Certificate” on page 36
CSR Setting Items
Items Settings and Explanation
Key Length Select a key length for a CSR.
Common Name You can enter between 1 and 128 characters. If this is an IP address, it should be a
static IP address.
Example:
URL for accessing Web Config: https://10.152.12.225
Common name: 10.152.12.225
Organization/ Organizational Unit/
Locality/ State/Province
You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide
distinguished names with commas.
Country Enter a country code in two-digit number specified by ISO-3166.
Related Information
& “Obtaining a CA-signed Certificate” on page 35
Importing a CA-signed Certificate
c
Important:
❏ Make sure that the printer’s date and time is set correctly.
❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time.
A
Access Web Config and then select Network Security Settings. Next, select SSL/TLS > Certificate.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Security Settings
36
To Next Page
Loading...
Need help?
General