B
Click Import.
A certificate importing page is opened.
C
Enter a value for each item.
Depending on where you create a CSR and the file format of the certificate, required settings may vary. Enter
values to required items according to the following.
❏ A certificate of the PEM/DER format obtained from Web Config
- Private Key: Do not configure because the printer contains a private key.
- Password: Do not configure.
- CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PEM/DER format obtained from a computer
- Private Key: You need to set.
- Password: Do not configure.
- CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PKCS#12 format obtained from a computer
- Private Key: Do not configure.
- Password: Optional
- CA Certificate 1/CA Certificate 2: Do not configure.
D
Click OK.
A completion message is displayed.
Note:
Click Confirm to verify the certificate information.
Related Information
& “Accessing Web Config” on page 20
& “CA-signed Certificate Importing Setting Items” on page 37
CA-signed Certificate Importing Setting Items
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Security Settings
37
To Next Page
Loading...
Need help?
General