21
Chapter 1 Product Overview
*1: The Power LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
*2: The Power LED flashing pattern is: lighting for 160 ms followed by a pause for 2400 ms.
*3: The Power LED flashing pattern is: lighting for 4960 ms followed by a pause for 160 ms.
*4: The Error LED flashing pattern is: lighting for 320 ms, pause for 320 ms, lighting for 320 ms, and pause for 1600 ms.
Network Connection Status
O: OFF N: ON F: Flashing -: Ignore the LED light
*The LED flashing pattern is: lighting for 320 ms followed by a pause for 320 ms.
O O O O N F *1 During turn-off process
O O O O O F *2
During power off
NOTE:
When a power off command is executed.
When turning off the printer without using the
power button, using the command is
recommended because doing so reliably saves
printer operating status information.
-----N Starting up the network firmware
--- F *1 NN
Waiting for the roll paper cover to be closed to
print a status sheet.
Bluetooth
LED
Wi-Fi
LED
Ethernet
LED
Paper
LED
Error
LED
Power
LED
Printer Status
- FF --N Starting the network firmware
- OO --N Not connected to a network
- ON --N Connecting via Ethernet
- OF --N Ethernet (An IP address has not been acquired)
- NO --N Connecting via Wi-Fi
- FO --N Wi-Fi (An IP address has not been acquired)
F -- --N Waiting to be paired with a device
N -- --N Connecting via Bluetooth
O -- --N Not connected via Bluetooth
Bluetooth
LED
Wi-Fi
LED
Ethernet
LED
Paper
LED
Error
LED
Power
LED
Printer Status
To Next Page
Loading...
