50
Chapter 2 Setup
Setup using TM-L100 Utility
Prepare the following items.
Computer: Windows 11/10/8.1/8/7
USB cable: With a Type B connector required for connecting to the printer
Setup utility: TM-L100 Utility
1
Connect the printer to the computer with a USB cable.
2
Turn on the computer.
3
Turn on the printer.
4
Start TM-L100 Utility.
5
Select the printer and click [OK].
If the printer does not appear, click the [Add Port] button to add the USB-connected printer.
6
Use the [Network] menu to configure the network settings.
For details on the settings, refer to the TM-L100 Utility manual.
7
After completing the settings, turn off the printer.
Network settings of the printer is completed.
To Next Page
Loading...
