Shipment Content:
1 x Printer
1 x Ethernet Cable
1 x USB cable
1 x Power Adapter (2 parts)
1 x Dispense Tray
1 x Wi-Fi Adapter (accessory is available for rent separately)
Quick Setup:
1. Connect the Power Adapter to the Power
Cable and the other end to the printer.
2. Power On by holding down the power
button until the power LED lights up.
The printer will take 4-5 minutes to be ready.
3. Connect the printer:
a. Option A: (Network) Plug in an Ethernet
Cable from the router’s LAN port into
the ethernet port behind the printer. To
check the network connection: Select Menu
from the home screen > General Settings >
Network Settings > Connection Check.
Careful not to insert the cable into the USB port.
b) Option B: (Direct) Plug the USB-B cable
into back of printer and the USB-A end into
the computer’s USB port.
c. Option C: (Network) Wi-Fi setup on page 4.
4. Printer Dashboard:
To Next Page
Need help?
General