Maintenance
56
Cleaning the Peeler (Peeler Model Only)
If labels, paper dust, or adhesive has adhered to the peeler, the print quality may decline.
To maintain good print quality, it is recommended to clean the peeler every day.
Clean the peeler following the procedure below.
1
Make sure the printer has been turned off.
2
Open the peeler cover.
If paper has been loaded, remove it.
(U"How to Remove Paper (For the Peeler Model)" on page 50)
3
Clean the roller using a cotton swab moistened with alcohol.
Completely remove dirt from the roller.
To Next Page
Loading...
