Epson ColorWorks C6500Ae - How to Remove Paper (for the Auto Cutter Model)

59
Chapter2 Setup
How to Remove Paper (For the Auto Cutter Model)
1
Check that the printer has been turned on.
2
Press the [Cut] button, and cut off the ejected labels.
3
Press the [Back Feed] button to feed the paper backward.
The paper can now be pulled out from inside the printer.
4
Open the paper cover.
5
Slide the movable edge guide away from the paper, and remove the paper.
Removing the paper is now completed.
To load paper, see the following pages.
"How to Load Paper (Auto Cutter Model - Supply from Inside)" on page 46, "How to Load Paper (Auto Cutter
M
ode
l - Supply from Outside)" on page 50