15
!CAUTION:
Never open any cover on the product or turn off the product during ink charging (while the (Power) LED is
flashing). Doing so during ink charging will consume a large amount of ink, which may require replacement
of the ink cartridge before completion of charging.
6. When ink charging completes, the (Power) LED changes from flashing to on.
7. Press the
Pause button.
Setting the Roll Paper
Set the roll paper by following the steps below.
1. Make sure that the printer is powered on. (U
"Turning On" on page 10)
2. Open the paper set cover.
To Next Page
Loading...
