Epson DS-730N - Turning off the Operation Time out Setting

17
2. Use the arrow buttons to select Settings and press the OK button.
You see a screen like this:
3. Press the OK button.
4. Use the arrow buttons to select Start-up Screen and press the OK button.
5. Use the arrow buttons to select the menu you want to see on the LCD screen (Home, Quick Send,
or Presets) when the scanner is powered on.
6. Press the OK button to exit.
Parent topic: Using the Control Panel
Turning Off the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Use the arrow buttons to select Settings and press the OK button.