21
You see a screen like this:
3. Use the arrow buttons to select Regular Cleaning Alert Settings and press the OK button.
4. Do the following:
• Set the Warning Alert Setting to On to receive a notification when it is time to clean inside the
scanner.
• On the Count Alert Setting screen, use the arrow buttons to change the number of scans before
the notification appears.
5. Press the OK button to exit.
Parent topic: Using the Control Panel
Changing Roller Replacement Alert Settings
You can set an alert to appear to remind you to replace the roller after a certain number of scans.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Use the arrow buttons to select Settings and press the OK button.
To Next Page
Loading...
