Epson DS-730N - Page 23

23
Note: For more information on administration settings, see the Administrator's Guide.
1. Press the home button, if necessary.
2. Use the arrow buttons to select Settings and press the OK button.
You see a screen like this:
3. Press the OK button.
4. Use the arrow buttons to select System Administration and press the OK button.
5. Select Admin Settings and press the OK button.
6. Select Admin Password > Register.
7. Use the displayed keyboard to enter a password and press OK.
8. Enter your password again to confirm.
Note: Keep a copy of your password in a safe place.
9. Press the OK button to exit.
When the control panel is locked, you must enter the password to access any of the locked settings. You
can change or delete the administrator password by entering the password and selecting Change or
Reset on the Admin Password screen.
Parent topic: Using the Control Panel