Projecting Two Images Simultaneously
61
c
To select an input source for the other image, select the Source setting,
press [Enter], select the input source, select Execute, and press [Enter].
a
• You can only select input sources that can be combined.
• While using the split screen feature, the Source screen appears
when you change the input source from the remote control.
d
To switch images, select Swap Screens and press [Enter].
The projected images on the left and right are swapped.
e
To enlarge one image while reducing the other image, select Screen
Size, press [Enter], select a size, and press [Enter]. To exit the menu,
press [Menu].
a
Depending on the video input signals, the images may not
appear at the same size even if you select Equal.
f
To select the audio, select Audio Source, press [Enter], select an audio
option, and press [Enter]. To exit the menu, press [Menu].
a
Select Auto to hear audio from the largest screen or the left
screen.
g
To align the projected images, select Align, press [Enter], select the
setting, and press [Enter] again. To exit the menu, press [Menu].
h
To exit the split screen feature, press [Split] or [Esc].
gg Related Links
• "Unsupported Input Source Combinations for Split Screen Projection" p.61
• "Split Screen Projection Restrictions" p.62
Unsupported Input Source Combinations for Split
Screen Projection
These input source combinations cannot be projected on a split screen.
To Next Page
Loading...
Need help?
General
