Do you have a question about the Epson EB-1880 and is the answer not in the manual?
native resolution | 1024 x 768 (XGA) |
---|---|
color light output | 4000 lumens |
white light output | 4000 lumens (ISO 21118 standard) |
power consumption (normal mode) | 363 W |
---|---|
power consumption (eco mode) | 297 W |
power supply voltage | 100 – 240 V ± 10%, 50/60 Hz AC |
f-number | 1.51 – 1.99 |
---|---|
focal length | 18.2 mm – 29.2 mm |
zoom ratio | 1.0 – 1.6 |
operating temperature | 5˚ to 35˚C |
---|---|
fan noise (normal mode) | 39 dB |
fan noise (eco mode) | 35 dB |
lamp type | 275 W UHE E-TORL |
---|---|
lamp life (normal mode) | 3000 hours |
lamp life (eco mode) | 4000 hours |
weight | 3.3 kg |
---|---|
dimensions (including feet) | 345 x 263 x 103 mm |
dimensions (excluding feet) | 345 x 263 x 93 mm |
How to connect computers via cable, USB, or HDMI.
How to connect video sources like DVD players or component video.
Connecting USB memory, cameras, and hard disks.
How to connect the projector to a network via LAN cable.
Step-by-step guide to connect and project from a computer.
How to automatically find and switch input sources.
How to project images from a computer via USB.
Instructions for installing drivers when connecting for the first time.
Methods to correct keystone distortion (auto and manual).
How Auto V-Keystone automatically corrects distortion.
Manual methods for keystone distortion correction.
Using the dedicated adjuster for horizontal correction.
Manual correction for both horizontal and vertical distortion.
Manually correcting each of the four corners of the image.
How to adjust image position using the foot adjust lever.
How to adjust image size using the zoom ring.
How to adjust image focus using the focus ring.
How to choose color modes for optimal image quality.
How to automatically adjust luminance based on image brightness.
How to change image aspect ratio for different inputs.
How to project images from USB storage without a computer.
Steps to connect USB devices and display the file list.
How to project images sequentially from a folder.
How to mute video and audio, and related settings.
How to zoom in on specific parts of the image.
Using the remote as a wireless mouse.
Limiting who can use the projector via password.
Explains password protection setup and types.
Details Power On Protect, User's Logo Protect, and Network Protect.
Locking control panel buttons (Full Lock, Partial Lock).
Explains EasyMP Monitor for network monitoring and control.
How to change settings remotely via a web browser.
Setting up email notifications for projector issues.
Using SNMP for network monitoring and problem reporting.
Configuration of DHCP, IP Address, Subnet Mask, and Gateway.
Core settings like Keystone, Panel Lock, Volume.
Network settings for configuration, LAN, and mail.
Detailed settings for Color Mode, Brightness, Contrast, etc.
Settings for H/V-Keystone and Quick Corner correction.
Options for locking the control panel.
Table showing indicator status, causes, and remedies for errors.
Common image projection issues and troubleshooting steps.
Troubleshooting steps when no image is displayed.
Solutions for blurry or distorted images.
Troubleshooting when the projector fails to power on.
Instructions for cleaning the air filter and intake vent.
Information on when to replace the lamp.
Step-by-step guide for replacing the projector lamp.
Step-by-step guide for replacing the air filter.