Epson EB-1880 - Automatically Detect Input Signals and Change the Projected Image (Source Search)

Automatically Detect Input Signals and Change
the Projected Image (Source Search)
Press the [Source Search] button to project images from the port currently
receiving an image.
Using the remote control Using the control panel
EB-1880
EB-1870/EB-1850W
EB-1860/EB-1840W
When two or more image sources are connected, press the [Source Search]
button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
The following screen is displayed while no image signals are input.
Example: EB-1880
Projecting Images
30