Submenu Function
Standby Mode
If you set Communication On, you can perform the
following operations even if the projector is in standby
mode.
• Monitoring and controlling the projector over the network
(EB-1880 only)
s "Monitoring and Controlling" p.63
• Outputting analog RGB signals from the Computer1 port
to an external monitor (EB-1880/EB-1870/EB-1850W
only)
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
and
Operation
*2
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.89
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.59
*2 Except for High Altitude Mode.
Network Menu (EB-1880 Only)
When Network Protect is set to On in Password Protect, a message is
displayed and the network settings cannot be changed. Turn Network
Protect Off and then configure the network.
s "Setting Password Protect" p.59
Submenu Function
Net. Info. - Wired
LAN
Displays the following network setting status information.
• Projector Name
• DHCP
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
Network Config‐
uration
The following menus are available for setting Network items.
Basic, Wired LAN, Mail, Others, and Reset
a
By using a Web browser of a computer connected to the projector on
a network, you can set functions and control the projector. This
function is called Web Control. You can easily enter text using a
keyboard to make settings for Web Control such as Security settings.
s "Changing Settings Using a Web Browser (Web Control) (EB-1880
only)" p.63
List of Functions
82
To Next Page
Loading...
Need help?
Display
Power
Projection Lens
Weight and Dimensions
