Epson EB-108 User Manual

Wired Network Projection
88
• If you want to connect the projector to the network using IPv6, select
IPv6 Settings to set the IPv6 setting to On, and then set the Auto
Configuration and Use Temporary Address settings as necessary.
a
To highlight the numbers you want from the displayed keyboard,
press the arrow buttons on the remote control. To select a
highlighted number, press [Enter].
h
To prevent the IP address from being displayed on the LAN standby
screen and Home screen, set the IP Address Display setting to Off.
i
When you finish selecting settings, select Complete and follow the on-
screen instructions to save your settings and exit the menus.
j
Press the [LAN] button on the remote control.
The wired network settings complete when you see the correct IP
address on the LAN standby screen.

Epson EB-108 Specifications

General

Brand	Epson
Model	EB-108
Category	Projector
Language	English