Remote Control
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] button
Each time you press the button, the image displayed
changes between the Computer1, Computer2, and the
DisplayPort ports.
C
[Video] button
Each time the button is pressed, the image displayed
changes between the Video input port and HDMI input
port.
D
Numeric buttons
• Enter the Password.
s "Setting Password Protect" p.70
• Use this button to enter numbers in Network settings
from the Configuration menu.
• The screen fit function is unavailable.
E
[Auto] button
If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize Tracking,
Sync., and Position.
F
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image "
p.44
G
[Num] button
Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protect" p.70
H
[Menu] button
Displays and closes the Configuration menu.
s "Using the Configuration Menu" p.85
I
[ ][ ][ ][ ]
buttons
• When the Configuration menu or the Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s "Using the Configuration Menu" p.85
• During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
Part Names and Functions
15
To Next Page
Loading...
Need help?
General
