c
The Web Remote screen is displayed.
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] button
Each time the button is pressed, it cycles through the
following images:
• Computer1 port
• Computer2 port
• DisplayPort
C
[Video] button
Each time the button is pressed, it cycles through the
following images:
• Video port
• HDMI port
D
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.61
E
[A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.61
Name Function
F
[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.64
• When using USB Display
s "Projecting with USB Display" p.32
• When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next screen.
G
[Source Search]
button
Changes to the next input source that is sending an image.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.31
H
[LAN] button
Switches to the image from the network connected device.
s "Switching to the Target Image by Remote Control"
p.32
I
[USB] button
Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB(TypeA)
port
J
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s
"Adjusting the Volume" p.41
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
Monitoring and Controlling
76
To Next Page
Loading...
Need help?
General
