Correcting the Focus
You can correct the focus using the focus ring.
Adjusting the Volume
You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[
a
] Decreases the volume.
[
b] Increases the volume.
Using the remote control Using the control panel
• Adjust the volume from the Configuration menu.
s Settings - Volume p.90
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Adjusting the Image
Hue, Saturation, and Brightness Adjustment
The Hue, Saturation, and Brightness for each of the R (red), G (green), B
(blue), C (cyan), M (magenta) and Y (yellow) color components can be
adjusted.
Make settings from the configuration menu.
s Image - Advanced - RGBCMY p.87
Hue Adjusts the overall hue of the image, bluish – greenish – reddish.
Saturation Adjusts the overall vividness of the image.
Adjusting Projected Images
41
To Next Page
Loading...
Need help?
General
