Each time the CAPS key is selected and the [Enter] button is pressed, it
switches between upper case and lower case.
Each time the SYM1/2 key is selected and the [Enter] button is pressed,
it sets and changes the symbol keys for the section enclosed by the
frame.
The following text can be entered.
Numbers 0123456789
Alphabet ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols ! # $ % & ' ( ) + - . / < = > ? @ ^ _ ` { | } ~
a
Except for the SSID, colons (:) and spaces cannot be entered on the
Network menu.
Some symbols (" * , ; [ \ ]) cannot be entered using the software
keyboard. Use your Web browser to enter the text.
s "Changing Settings Using a Web Browser (Web Control)" p.102
Basic Menu
Submenu Function
Projector Name
Displays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters (The following symbols cannot be used: " *+ , / ; < =
> ?[ ` \ ] |).
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters
(symbols cannot be used).
Web Control
Password
Set a password to use when making settings and controlling the
projector using Web Control. You can enter up to eight single-
byte alphanumeric characters (* cannot be used). The initial
password is "admin".
Web Control is a computer function that allows you to set up and
control the projector by using the Web browser on a computer
connected on a Network.
s "Changing Settings Using a Web Browser (Web Control)"
p.102
List of Functions
126
To Next Page
Loading...
