Submenu Function
Projector Key-
word
When set to On, you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to On.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
Wireless LAN Menu
Submenu Function
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick (default), a small network is created
automatically by the projector and computer. Used in
combination with EasyMP Network Projection. When SSID
Auto Setting is set to On, the projector becomes an easy access
point. When set to Off, the network is created in
Ad hoc
mode
g
.
If you select Advanced, the connection is established in
infrastructure mode
g
through the access point installed. Set to
Advanced when monitoring and controlling the projector over a
network.
See the following manual for details on Connection Mode.
s EasyMP Network Projection Operation Guide
s EasyMP Multi PC Projection Operation Guide
Channel
(This can only be set if Connection Mode is set to Quick.)
Select the frequency band used by the wireless LAN from 1ch,
6ch, or 11ch.
This is set to 11ch by default.
List of Functions
127
To Next Page
Loading...
