Connecting Multiple Projectors (EB-536Wi only)
When using the interactive features in the same room as multiple versions of the same projector, you need to connect the optional Remote control cable set
(ELPKC28) to the SYNC port on each projector. Interactive pen operations are stabilized by linking the projectors using cables.
In
Out
The SYNC port has an IN and OUT socket. When you connect one end of the Remote control cable set to an IN socket, connect the other end to an OUT
socket.
After connecting the cables, set Sync of Projectors to Wired from the Configuration menu.
s
Extended - Easy Interactive Function - General - Advanced - Sync of Projectors p.123
Connecting Equipment
38
To Next Page
Loading...
