Epson EB-536Wi - Connecting a Microphone

Connecting a Microphone
You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone.
a
 Plug-in-power is not supported.
 Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound.
s Settings - Mic Input Level p.119
 Make the following settings to output audio from a microphone when the projector is off.
- Set Standby Mode to Communication On.
- Set A/V Output to Always On.
s ECO - Standby Mode p.133
s Extended - A/V Settings - A/V Output p.120
Connecting Equipment
32