Attention
Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction.
If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.120
If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the audio input port. After connecting the cable, select
the input port you connected to from HDMI Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI Audio Output p.120
If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projectors.
When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting Equipment
29
To Next Page
Loading...
