a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.113
Using the remote control Using the control panel
b
Select Keystone from Settings.
c
Select Quick Corner, and then press the [ ] button.
d
Select the corner to correct using the [ ], [ ], [ ] and [ ]
buttons on the remote control, or the [
w][v] [Wide], and [Tele],
buttons on the control panel, and then press the [
] button.
e
Correct the position of the corner using the [ ], [ ], [ ], and
[
] buttons on the remote control, or the [w], [v], [Wide]
and [Tele] buttons on the control panel.
When you press the [
] button, the screen shown in step 4 is
displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
Adjusting Projected Images
50
To Next Page
Loading...
