Introduction
12
Applicable parts Necessary items
For the wall mount
•
M10 or 3/8 inch x 60 mm anchor bolts (for securing the wall plate: at
least x4)
•
M10 screw (for securing the wall plate temporarily: x1)
•
17 mm ratchet wrench (for adjusting hexagonal axis)
•
Cables to connect to the projector
•
Devices such as mini PCs
For the Touch Unit
•
M4 screws (to secure the Touch Unit: x2)
For the Touch Unit bracket
•
Anchor bolts or screws for the bracket (depending on what the
mounting surface is made of)
•
M4 anchor bolts (x4)
•
3.8 mm diameter wood screws with a length of 45 mm or more (x4)
For the pen stand
•
M4 x 20 mm screws (x2)
To Next Page
Loading...
