Epson EB-760Wi - Performing Mechanical Adjustment Using the Setting Plate Installation Guide

Installing the Wall mount
65
i
Press the [Enter] button to start auto adjustment
When auto adjustment is complete, use Quick Corner ( p.70) to make further adjustments. Using Arc
Correction or Point Correction returns the image to the status before auto correction was performed.
Performing mechanical adjustment using the Setting Plate Installation Guide
Use the guidance screen to adjust the position of the image.
a
Press the [Menu] button
Using the Remote Control Using the Control Panel
b
Select Setting Plate Installation Guide from the Installation menu
You see the guidance screen.
c
Turn the adjustment dial in the installation guide to adjust the horizontal roll